- Видео 1 672
- Просмотров 750 400
PWE
Финляндия
Добавлен 5 июл 2010
I vlog... 'everyday things'.
Oh and the renovation of our home.
Oh and the renovation of our home.
Видео
Update not as planned… ouch! 😣
Просмотров 29910 месяцев назад
Renovation is on hold until my finger heals and I’m ready to focus 100% again on all the tools and tasks to get this room finished.
Renovation: what’s in the pivot hinge box? | Arlu Argenta Pivotica pro E 100
Просмотров 71911 месяцев назад
A look at the pivot hinge hardware that I am using for the two hidden doors in my timber feature wall.
Renovation: it’s in! Timber frame for a hidden door installed in the wall.
Просмотров 221Год назад
A lot of effort and fiddling but finally got the door installed today.
Renovation: hidden door will mount here when I stop making mistakes
Просмотров 107Год назад
This is tricky! Trying to make a perfect fit for the hidden door into the timber wall.
Renovation: timber frame for a hidden door
Просмотров 364Год назад
The timber frame was ready for assembly today. This looks a lot like a wall piece, but it will be a door.
Renovation: I’m still here.
Просмотров 108Год назад
Going to see this renovation through to the end and continue to share as much as I can here on RUclips.
Renovation: one more wall done | white clay plaster
Просмотров 67Год назад
Now I have two clay plaster walls done. Entirely done. Very happy but my shoulders are tired after 5 hours of compression with a small steel trowel.
Renovation: another one done with white clay | First coat
Просмотров 54Год назад
Two hours and the first layer of clay is on the wall.
Renovation: panting a clay wall with cellulose | Timelapse
Просмотров 127Год назад
Getting ready for a white coat of clay. Over the base red clay I paint the wall with cellulose. This helps stop the red colour come through to the white. It also provides a good base for the white clay coat.
Renovation: ceiling preparation before boards go up.
Просмотров 61Год назад
Renovation: ceiling preparation before boards go up.
Renovation: avoid the join lines.. Clay plastered the whole wall again!
Просмотров 47Год назад
Renovation: avoid the join lines.. Clay plastered the whole wall again!
Renovation: now even better.. my best clay plaster wall.
Просмотров 153Год назад
Renovation: now even better.. my best clay plaster wall.
Renovation: my best clay plaster wall yet!
Просмотров 127Год назад
Renovation: my best clay plaster wall yet!
Renovation: repairing a crack in a clay wall | Part 3
Просмотров 59Год назад
Renovation: repairing a crack in a clay wall | Part 3
Renovation: UKU white natural clay finish plaster | Timelapse
Просмотров 132Год назад
Renovation: UKU white natural clay finish plaster | Timelapse
Renovation: repairing a crack in a clay plaster wall | Part 2
Просмотров 105Год назад
Renovation: repairing a crack in a clay plaster wall | Part 2
Renovation: clay repair, drying well so far.
Просмотров 32Год назад
Renovation: clay repair, drying well so far.
Renovation: repairing a crack in a clay plaster wall | Part 1
Просмотров 201Год назад
Renovation: repairing a crack in a clay plaster wall | Part 1
Renovation: head clear and so is the room.
Просмотров 24Год назад
Renovation: head clear and so is the room.
Renovation: getting ready for white clay plaster to finish off the wall.
Просмотров 61Год назад
Renovation: getting ready for white clay plaster to finish off the wall.
Renovation: plywood subfloor. It’s done!
Просмотров 105Год назад
Renovation: plywood subfloor. It’s done!
Renovation: subfloor.. so close to done.
Просмотров 30Год назад
Renovation: subfloor.. so close to done.
At 1:43 you say "I'm going to jump to this little web page here", but you never tell what the webpage is, nor is it in the video description.
I know this is an older video, but it still managed to help me. Thanks.
Did it exceed the 2-year lifetime of the cheaper versions?
Yes! Still going strong.
I followed the instructions but why does the device not appear in the MQTT integration in HomeAssistant?
Totally agree !
How have these units worked out for you over the long term ?
I am very happy. Look for the Blauberg unit. Exact same model. I bought another one recently and am again very happy.
Cheers @@PaulWarrenEatonLooking at the Vento Midi which seems to be their new version 👍🏻
Thank you for the vid man! Appreciate an update a year on from your last? Still recommend this waste kit?
Nice to hear the comparison 😊
Everybody please note that this video was uploaded in Winter (December) ....... In Finland. Hahaha. The first coat did all the sinking-in, this was the second coat, and took longer drying because the wood was already saturated by the first coat.
Yep. You are correct. Most important for the drying is air movement, more than summer heat. 😜
gracias from México
Love the grumpy style
If i didnt wipe enough, and now it it is sticky. What shall I do?
Oh that can be tricky. Either you need to rub harder… kind of to take it off. Even using a light sand paper. Then you start again. Or… waiting longer for it to dry more could also help. In some patches where that happened to me, I rubbed harder 💪 Starting again. No it’s not fun. Good luck.
Thank you very helpful I just purchased this router.
Hi, bin gerade über dein video gestolpert. Kannst du sagen welche Cellulose du genau benutzt? Handelt es sich wirklich um reine Cellulose oder um modifizierte Cellulose (z.b. Methylcellulose)
This: uku(dot)eu/en/other-products/ just replace the dot 😀
Tnx man
How easy was it to install?
From what I saw… super easy.
@@PaulWarrenEaton He doesn't show any of the installation at all... The wiring or fixtures etc.
@timboslice4019 that’s true. If I was a qualified electrician or in a country that does not require electrical work to be done by a qualified electrician… then it might be a different video.
@@PaulWarrenEaton Oh yeah it's your video 😂 I was hoping to get these, did you get an electrician to install then?
A delightfully whacky approach, yet still imparting exactly what I needed to know. Nice job.
You can control bulbs without a hub. You can control outside the house. I have it built into my pixel phone and can control it with google hubs too. The video didn't show me at all why an experience would be better with the hub. For me the advantage of connecting to google hub is to integrate multiple brands of devices. I am looking for a video that will explain why I should shell out more money when a google or Alexa hub can do it too. Explain the differences and how you can integrate more than just with Philips hue in a home if you so choose. Rating B- for video.
Gosh they’re nauseating. Need more footage of the place not you two
🤣
Hi Paul, I'm a ( 14 in total ) Tasmota user with node-red for over 10 years that function flawless with absolutely no issues. Been trying for maybe 6 months now to see/use them in this **** HA and to no avail. Have had may new installs of HA on various systems with the same results, HA may see and be able to use maybe one of the devices ok the rest are either show as grey'd out and marked unavailable or are nowhere to be found in HA. So thought your vid maybe the missing link, but at 2:38 in the vid I am totally lost. Remember I am a total nubee to HA as I have never as yet seen anything working in it but am seasoned user of node-red and Tasmota. Can you throw any light ( no pun ) on why this **** HA gives so much problem to some, clearly your no one the 'unfortunates' - Kind Rgds.
what if i did not wipe out
The part where you say Useless is Exactly what I’m looking for. I’m going to install a Hue light switch module on an indoor switch that controls both my porch light and garage door sconces since I have them wire together at the switch. Looks like this will perfectly work for sunset On and sunrise Off control. It requires geographical location which it should. Sunset and Sunrise times are different every day and vary by longitude and latitude. Thanks for your “Useless” commentary
😀 Great that you live in a part of the world where sunrise and sunset work perfectly. Here in Finland it’s already that time of year where sunset is at 10pm. Soon it doesn’t even get dark. The street lights (controlled by light sensors) don’t turn on at all overnight soon ☀️ So for me I have realised that light sensors (like the city infrastructure uses) would be the go. Thanks for your comment. I’m always keen to hear if anything in one of my videos helps one way or another. Happy tinkering.
Nice to see you again!
welcome back!
Thanks.
👋🏻
I thought only boiled linseed oil was a fire hazard due to additives. So raw linseed oil is also like that on its own? Thanks
The risk is low but better to be safe than sorry.
@@PaulWarrenEaton Ok, thanks! Im going to use raw linseed oil for a new wood playground skyfort2 this week. The parts came from China and the quality is bad. the wood is severely dehydrated and some pieces are cracking a bit. Hopefully linseed oil helps to preserve it better.
@@PaulWarrenEaton Quick question. Im going to use the raw linseed oil outside and Im going to dry playground parts outside in my backyard. Do you think its Ok? No rain in sight, we're in drought.
@SH-jy6lc in my opinion I don’t see any problem.
I have a mix of both older hue and new hue bulbs. The older hue bulbs won't take the new firmware. Even though you can select it in the app settings, for the older bulbs, it will not allow “Power on State”. I'll have to relocate those bulbs out of my bedroom.
it is not a good idea to insulate with such insulation from the inside, because moisture from the room will pass through the reeds and stop in the concrete wall, and the insulation may be wet
Please do share if you have any extra info. However this is based on principles that have existed long before modern insulation techniques. The clay actually draws moisture out of the concrete. On the other side of the wall there is also correct drainage.
Great video! exactly someting i am looking for to add to my temp sensors from Tuya. still some yaml code error i need to figure out, but i'll figure it out (i hope)
had to fumble with the code for a bit, but it worked! thanks a lot!
This is wonderful. It simply describes how to router the stringer and looking at is, it is now so intuitive. Thanks.
Groping in the dark is an art and you are an artist. Thanks to you I solved my problem!
which router would you recommend for home use? What is a good authorized seller in the USA?
There must be a better way to do that!
Thanks
Just bought one and will not detect internet.
Hi there! Can I ask why you wrap it in paper? Is it not less fire resistant like that? Why not use a plastic vapor barrier? Thanks!
My slow reply but I’ll post it anyway. The paper makes the whole wall air tight. Making the structure airtight with paper can still let vapour in the air pass through but it helps keep the heat in or cold out. The wool and paper together really do make things warmer. Plastic is a vapour barrier. I want the walls to ‘breathe’. Air tight but not blocking vapour. I prefer not to live inside a plastic bag 🤣
hey there and thx for your great tutorial - but i got a problem....dont know why... i want to generate an offset for a govee humidity sensor....but always an error pops up: template: - sensor: - name: "Govee_with_Offset“ unit_of_measurement: "°C" state:> {% set govee = states('sensor.h5179_f058_humidity') | float %} {% set offset = states('sensor.goveeoffsethumidity') | float %} {{ (govee*offset)}} Error is: "can not read a block mapping entry; a multiline key may not be an implicit key" I created the template sensor "Govee_with_Offset" and another one "GoveeOffsetHumidity" The entity card I created isnt changable too - I have to set a Conditiontemplate and when I imput "1" there is stand 1% ?! Sorry for dumb question but this is my first time doing this :-9 Maybe you can help me here...
Best to overkill than under kill & collapses . I'm not sure if you screwed or bolted the top & bottom steel plates of the prop so it doesn't accidentally move.
is there a way to control some non hue stair lights via Hue bridge and 2 hue motion sensors? Just bought a Wall switch modul but im a little confused how to make it work with it since i dont have a switch installed for the lights at the moment
What cartridges did you use?
The more magnetic with in the speaker the better in my head. Thank you for the review.
Yeah running out of staples in the middle of a job .. I had that happen a few times building fences, and it really spoils the flow of work.
Exactly! No flow and I just start finding excuses to continue another day.
There's a story in a bloke with your accent working on a house in Finland. Isn't that about as far away from home as you can get without leaving the planet?
🤣 Best comment. Yes it’s true. You picked the accent right and know your geography well.
Looking for info about suitable products for a van build project. How are you enjoying your wool now?
Loving the wool. Totally happy with it. I think it’s ability to handle a bit of moisture would also make it work well in a van build.
you just decide not to add the link you said you would?
Damn. You’re right. Thanks for calling me out on this. Here you go: tasmota.github.io/docs/MQTT/
thanks @@PaulWarrenEaton
It's January 2024, does the phone case with the Sirius lens still hold up?
Thank you, I have to do this,I have about 14 jobs to hold up,would you recommend 7 acrows and say scaffold planks to hold it,its only a flat roof on a conservatory I want to hold up while I knot 3 sides of frame
The best thing I would recommend is more props than necessary. I can say that it was nice to have so many supports that I heard and felt nothing move. When I look at the rental cost for each prop… good insurance to use too many. Good luck!!!
Original remote controls and switches worked without app or being connected to the Internet.
Great video and explanation! In the specific scenario of connecting just two 2-meter LED strips in parallel to one controller, would it still be necessary? I plan to use the "Controller to 6-Pin Adapter" to have a female 6-pin available out of the controller, and then split an Ethernet cable to connect both 2-meter LED strips. In this way I'll have a spare controller for other cut strips I have. Thoughts?
Where do I find more of your content
Just the kind of comment to inspire back to make more tinkering content soon. Thanks.